The cut of a diamond refers to the way the stone is shaped and polished, how the facets are arranged and how deep or shallow it’s cut. There are various cuts of diamonds that refer to that, many of them patented. Both Asscher and Princess diamonds are square-shaped diamonds, but they are vastly different in how the facet are cut and arranged.

Cut also refers to the shape of the diamond. The shape is often determined by how the molecules of the crystal are arranged. If it’s an octahedron, it will be cut as a round brilliant, and often two round brilliants can be cut from the same original crystal. Other crystal configurations, such as macer, will be cut as marquise or oval diamonds.

The modern round cut brilliant stone has 58 facets, or 57 if the tiny bottom facet, the culet, is omitted. The Princess cut is unique in that it’s a square diamond with pointed corners. Many diamonds, even square and emerald cut diamonds will have rounded or cut-off corners, because contrary to popular opinion, a diamond can chip or scratch if it knocks against something at the wrong angle. It’s a bad idea to try to scratch a mirror with any diamond!

An emerald shaped diamond is a rectangle cut with longer, flat facets. It’s a good cut for a diamond that’s exceptionally clear. If it’s not, then an emerald cut diamond can appear cloudy.

The Asscher diamond is similar to an emerald shape, except it’s square. It’s cutting resembles a spider web when viewed from above.

Other diamond shapes are self-explanatory. A pear- or tear-shaped diamond is exactly that. It’s an oval that’s wider at one end and curves to a point at the other end. An oval is a perfect oval. The marquise-shaped diamond can maximize the carat weight of a stone because it’s a longer and flatter cut, yet highly faceted. The marquise comes in a variety of length-to-width ratios.

When did diamonds first become recognized as precious stones and used for jewelry? The earliest reference to them has been found in a Sanskrit document dated around 300 BCE. They were associated with the gods and were used to decorate religious icons and statues. In India, only kings, the highest caste, were allowed to own them.

Although diamonds were traded east and west of India, they were still prized in their natural crystal state, or polished to increase the shine and luster of them. The first guild of diamond cutters was established in 1375, and it was then that the practice of cutting the stones and faceting them was developed.

From the earliest times, diamonds were the province of kings and queens. In fact, in the 13th century, Louis IX of France decreed that only royalty could own diamonds, a dictate which faded away about 100 years later. By the late 15th century, they were used as wedding rings.

The largest diamond ever found was a 3106-carat diamond discovered in 1905 in a mine owned by Thomas Cullinan, for whom the stone was made. It was cut into smaller stones, the largest being made into the 530-carat Great Star of Africa diamond, cut by the Asscher Brothers, a famous diamond firm to this day. It’s also called the Cullinan I diamond, and is set in the Scepter of the Cross of the United Kingdom. A smaller stone cut from the Cullinan diamond is called the Lesser Star of Africa. It weighs 317 carats and is part of the Imperial State Crown. Both gems can be seen as part of the British Crown Jewels which are displayed in the Tower of London. The rest of the Cullinan diamond was cut into 11 smaller-weight stones and a number of fragments.

While the Cullinan diamond is the largest diamond ever found, there is a rumor that the man who discovered the diamond actually broke off part of the diamond before presenting it to the mine’s owner. This diamond, if the rumor is true, would have been 5,000 carats!

Clarity is an important aspect of a diamond,
and it is important to know how to grade the
clarity of a diamond before you buy one. It is
actually quite easy to learn how to grade the
clarity of a diamond. There are basically two
things that you must understand: Diamonds
with visual inclusions and blemishes, and
those that are ‘eye clean?meaning that there
are no inclusions or blemishes that can be
seen with the naked eye. From there, the
clarity of a diamond is further broken down
into subcategories.

Many people mistakenly think that diamond
clarity refers to how clear it is. This isn’t so.
Clarity actually refers to the internal and
external imperfections of the diamond. The
best diamonds, of course get a grade of FL
or IF ?Flawless or Internally Flawless ?
meaning that it is perfect. A grade of I-1, I-2
or I-3 means that the diamond is imperfect,
with a grade of I-3 being the worst.

Other grades are VVS1 and VVS2, which
means that the diamond is very, very slightly
imperfect; VS1 and VS2, meaning the
diamond is very slightly imperfect; SI-1 and
SI-2, which means that the diamond is
slightly imperfect.

198

Garnets have been known and used in jewelry for thousands of years. Legend says that Noah used a garnet lantern to safely steer his Ark through the darkness of the night and the great flood. Garnets are found in jewelry from ancient Egyptian, Greek and Roman eras. Many courageous discoverers and travelers wore garnets for protection, as they were considered popular talismans and protective stones, because it was believed in those days that garnets illuminate the night and prevent their wearer from any sort of evil. Today science explained to us that the proverbial luminosity of garnet is caused by its high refraction of light.
Although the color red is the one which occurs most frequently, there are also garnets showing different shades of green, pale to bright yellow, fiery orange and fine earth- and umbra-shades. Only blue is a color which is not available in garnet. Garnets are gemstones which are in high demand and are often worked into pieces of jewellery – especially since today not only the traditional gemstone colors red, blue and green are cherished by the consumer, but the intermediate shades and hues are also very popular. Garnets are unusual because their tone can change depending on whether they’re seen in natural or artificial light.
Some of the alternately-colored garnets are very famous. Spessartine garnets are a bright orange to orange-red. These are extremely rare. There is a type of garnet called a Mandarine garnet which is also orange. It too is rare.
There are even green garnets, even though one doesn’t associate this color with garnet. The star among green garnets is rare demantoid. It shows enormous brilliance, higher even than that of diamond. Russia’s leading court jeweler Carl Faberge loved the brilliant green garnet from the Urals more than any other stone, and liked to use it in his creations.

The smart groom-to-be does his research before buying his fiancee a diamond ring! There are more styles and cuts to choose from than ever before. It’s not enough to be educated about the four Cs of diamonds – cut, color, clarity and carats. Now there are all types of diamond cuts and settings to choose from.

The most popular style is still the round brilliant. It’s one of the earliest cuts ever developed and now relies on precise mathematical equations to create a stone with fire and brilliance that the earliest gem cutters could only have dreamed of.

But many brides want something completely unique. There are many traditional cuts to choose from. A pear-shaped is just that – wider at one end than the other. Or she can choose an oval, emerald or heart-shaped diamond. There are other cuts with unique faceting, such as the square princess-cut diamond.

Some cuts are patented, like the elongated Ashoka diamond or the Asprey & Garrard Eternal cut diamond. Other branded and patented cuts include:

Elara – a square-cut diamond with rounded corners
Asscher – a square diamond with rounded facets that gives an unusual complexity to the diamond
Couples diamond – this diamond is faceted to reveal either a circle of hearts or arrows inside. It’s a truly unusual diamond that requires precise cutting for the image to appear properly.

The price of a diamond increases exponentially with its carat weight. A one-carat diamond costs much more than 10 10-point diamonds and a two-carat diamond costs more than twice as much as a one-carat diamond (given equal quality in other areas).

One way to enhance a ring is with embellishments such as baguettes or trillions. A baguette is a small emerald-shaped diamond that can be placed on either side of the main stones and a trillion is a triangle-shaped diamond that also is a good enhancement to the center stone.

Fancy colored diamonds are all the rage
these days. Gemologists have developed
new ways to create versions that are
affordable for the average person – by
treating less desirable diamonds. These
less desirable diamonds are treated with
irradiation followed by intense heat. This
turns brown and yellowish diamonds into
beautifully colored diamonds that you can
afford. This produces stunning greens,
blues, yellows, reds, purples and other
colors. These colors are considered
permanent, but there is a possibility
they could change during repairs if a high
heat is used.

Treatments like irradiation make it possible
for more people to own these vividly colored
diamonds. Most natural colored diamonds
are rare and also extremely expensive. When
shopping for colored diamonds you need to
assume that any affordable fancy color
diamond has been treated. Ask about the
stones origin and request to view a lab
certificate to verify authenticity.

Synthetic colored diamonds are another
option if owning a colored diamond is
something you desire but cannot quite afford.
They are real diamonds, but they are created
in a lab.

Natural fancy color diamonds get their
coloring from different trace elements present
in the stones, such as nitrogen, which
produces a yellow diamond. Diamonds can
be colored by exposure to radiation during its
creation. An example of a diamond affected
by radiation is a Green diamond.

Another way that a natural colored diamond
gets color is by its inclusions. Regarded as
flaws and undesirable in a colorless diamond,
inclusions give unique tones and brilliant
flashes of color in a fancy color diamond.
Remember that Natural fancy colored
diamonds are very expensive, any colored
diamond labeled to be sold as natural should
be accompanied by a certificate from a
respected grading lab.

A “fancy” diamond is a natural diamond that
has color. These colors vary from red, green,
purple, violet, orange, blue and pink ?and
most shades between. Fancy color shades
vary from faint to intense.

The most famous diamonds in the world are
Color diamonds. The Tiffany Diamond,
which is yellow and the Hope Diamond which
is blue are colored diamonds. Color
diamonds have an amazing financial track
record. The value has never decreased on
wholesale level in more than 30 years. Blue
and pink diamonds have doubled every 5
years of a strong economy. In the 1970′s
you could have bought a very high quality
blue diamond for about 50K and today the
very same stone would be worth between
2 and 3 million.

411

Emerald, the birthstone for May, is one of the world’s most valued gems. Mined by the Egyptians more than 3,500 years ago for the Pharaohs, this precious green stone also has been worshipped by the ancient Incas and Aztecs, the Indian Maharajas and Maharanis, and kings, queens and other royals all over the world throughout history.

The stone is prized for its shades of green, which represent the color of life and the eternally returning spring. For this reason, emerald has held a special religious position in many cultures.
The Gachala Emerald, an uncut 5-cm stone weight 858 carats, was found in Colombia in 1967. It was given to the Smithsonian Institute in Washington, D.C., by famous New York jeweler Harry Winston.
Another huge, rare emerald is the Sacred Emerald Buddha. It resides on the grounds of the Grand Palace in Bangkok, Thailand. This venerable image was, according to historic legend, accidentally uncovered after a lightning strike on a Chedi in Northern Thailand’s Chiang Rai district in AD 1434. The temple’s resident abbot discovered stucco flaking off the image exposing a hidden green colored Buddha statute. The remaining stucco was duly removed reveling what the world now refers to as the “Emerald Buddha.”
The Mogul Emerald is one of the largest emeralds in the world. The rectangular cut tablet, which dates back to 1695, weighs 217.80 carats and is about 10 cm high. One side is inscribed with Islamic prayers and the other is engraved with opulent flower ornaments. The emerald is thought to have come from the reign of Emperor Aurangzeb –the last of the great Mogul rulers, who controlled much of India. It was discovered in Colombia by the Spanish conquistadors and most likely arrived in India through trade during the Mogul dynasty, according to experts. The emerald was auctioned off at Christie’s of London for $2.2 million to an anonymous buyer in 2001.

There are millions of minerals that exist on the earth, but few of them are prized as gems and used for adornment. Many of them aren’t in colors that are usually highly prized for jewelry. Or they’re not able to be cut and polished to be made wearable as jewelry.

Often it’s a matter of changing taste and times. In Imperial Russia and in the Victorian era, the mineral malachite and other opaque minerals were highly valued as gemstones jewelry. It is often a by-product of copper mining, and is distinguished by a brilliant green color, with dark concentric circles of color swirling through it. It’s not as highly valued because it’s easily available and not as expensive as an emerald or ruby. But there is an entire room devoted to malachite in the Russian museum, the Hermitage, as testament to its desirability among the most privileged class of people.

There have been discoveries that indicate that malachite was mined in Egypt as early as 4,000 B.C. It’s a soft gem, and easily carved and shaped. It polishes to a beautiful, rich sheen. But still is not highly prized in the U.S. as a gemstone.

Very often some minerals simply shouldn’t be used as gemstones, but because of their beauty, people wear them as such anyway. A moonstone is one such gem. It’s relatively soft, with a rating of 6 on Moh’s scale of mineral hardness, compared to a diamond’s hardness rating of 10. It’s a type of mineral called orthoclase, but when it exhibits a translucent, milky quality, it’s then called moonstone.

Other minerals exist, but are simply not prized for gemstones. Among the more common minerals, quartz stands out as one that can be used for jewelry, as well as decorative items.

The term fire is commonly used to describe a diamond, but what does it refer to? The ancient Greeks thought that fire in a diamond symbolized the eternal flame of love. Fire in a diamond is the dispersed light that appears as rainbow-like flashes of color. You can usually observe a diamond’s fire in places like restaurants or clubs where the light is lower. The amount of fire depends on how the stone is cut and faceted. Older cut diamonds appear as if they have more fire because they’re cut with steep crown angles and flatter tables of the facets.

Other characteristics that are used to evaluate a diamond include brilliance and scintillation. Brilliance requires both brightness and contrast in the diamond and refers to how light is reflected back to the viewer, or return-of-light in the diamond trade. To many jewelers, it’s the most important quality in a diamond, and is what people react to when they exclaim over a diamond.

Diamonds also have a quality called scintillation. Scintillation refers to how light disperses from the stone when it’s moved. While brilliance is the quality of dispersed light when the diamond is in a stationary position, scintillation is observed when the diamond moves in the light. They’re closely related qualities, while fire is a different attribute.

The way a diamond is cut will determine how much fire or brilliance it has, and often one may have to make a trade-off for one quality or another. Which way is the best way to go? For the most part, most diamonds are cut more for brilliance and scintillation rather than for fire. When shopping for a diamond remember that it’s in investment, yes. But what really matters is whether you love it. Qualities like brilliance vs. fire really do pale in comparison to that one critical element!

Emerald has one of the longest histories of all gemstones. The first known emerald mines were in southern Egypt and were operated from before 1000 BC into the 1700′s. This is a testament to the high value people have placed on emeralds for many centuries as the work was hard and dangerous and the stones small and poor by today’s standards. Treasured for at least 4,000 years by different cultures all around the world, emerald is said to quicken the intelligence as well as the heart. Legend gives its owner the gift of eloquence.
In contrast to other beryl gemstones, emerald is typically heavily flawed with cracks and inclusions of fluid and minerals. These inclusions are called “jardin” (or garden) as they typically resemble leaves and branches. These characteristics are not looked upon as negative aspects for emerald as they would be for other gemstones. Indeed, these inclusions are considered part of the character of the stone and are used to assure the purchaser that the stone is genuine. Because emeralds are so rare without inclusions, some inclusions are expected and do not detract from the value of the stone as much as with other gemstones. Most emeralds on the market today have been treated with various types of oil or resin to improve their appearance.
Emeralds are cut in Jaipur, India and Tel-Aviv, Israel as well as in the mining countries, such as Brazil. Emerald is one of the most difficult gemstones to cut because of the high value of the rough stone and the many inclusions found in crystals. Small changes in orientation can make a large difference in the final appearance of the gem. Skilled craftsman who specialize in cutting emerald can be found in cities around the world for jewelers who insist on having stones perfected for the optimum brilliance and vibrancy.